This DIY phone charging station is made out of a 27.3 oz water bottle, so it’s essentially free! All you need is a water bottle, scissors, marker and measuring tape or ruler. Measure approximately 3″ or more from bottom of bottle `(my phone is approximately 3″ x 5″, if yours is larger you should size accordingly and possibly use a larger bottle). At that measurement draw a half-circle around bottle. At the end of each side of that line draw a straight line approximately 4″ toward top of bottle, then join the lines together at the top. Cut along the marker lines. Next, using your plug as a guide, outline the plug in the center of the back towards the top (make sure your phone fits once you hang it on the plug). Finally paint your charging station as you like, or don’t, it’s entirely up to you!